Extend a video and audio signal up to 100m at 1920x1200 resolution
(1) RJ-45 Female
(1) VGA Female, (1) 3.5mm Stereo Female
Product Description
The VGA+3.5mm Audio over Cat5 Box Receiver, when used in conjunction with a transmitter, allows you to extend a VGA and 3.5mm audio signal over two Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 100m without signal degradation at 1920x1200 or 1920x1080 resolutions. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. The transmitter and receiver come in either wall plate or box form factors and are interoperable allowing you to choose the form factors that are best suited for the application. In addition, this solution utilizes phantom power providing you the flexibility to power at either the transmitter or receiver end.
EQ (sharpness) adjustments can be made for optimal signal clarity. Built-In power surge protection and high ground loop immunity ensure high performance signal extension.
Please note: *Skew-free UTP cable is recommended for best results at longer lengths. *Longer distances can be achieved at lower resolutions
Product Specifications
UPC :
757120893684
Weight :
0.548 LB
Supported Resolutions: • 1920 x 1080 • 1920 x 1200
System Requirements
• Source device with a standard VGA video and stereo audio outputs • One transmitter, box or wall plate • Two standard UTP cables* (CAT5, Cat5e, CAT6) of identical length • One receiver, box or wall plate • Display device with a standard VGA and stereo audio input
*Cat5e or CAT6 is recommended for this product. STP cabling is recommended for environments with high EMI or RFI.
