Shadow

TruLink® Wireless USB Host Adapter

#81676
Transmit data wirelessly to compatible VGA or HDMI devices.

Product Description

The TruLink Wireless USB Host Adapter works with a compatible Wireless VGA, VGA+Audio, or HDMI® Adapter to enable your computer to communicate with connected devices. Use additional Wireless USB Host Adapters to connect as many computers as you wish to a single device (Note- only one computer will work with a connected device at time). This wireless solution enables in-room wireless connectivity at distances up to 30 feet between the computer and connected devices. The highly secure, wireless connection is ideal for classroom or conference room presentations, or in households with multiple computers.

Requires an existing Wireless VGA Adapter or an existing Wireless HDMI Adapter - not included.
Tap an icon to learn more:

Product Specifications

Colour : Black
UPC : 757120816768
Warranty : 1 Year
Vendor : C2G
Weight : 0.108 KG
• Rotating connector allows you to position the host adapter at almost any angle.
• Video streaming up to 720p (720p only available at resolution 1024 x 768 pixels or lower)
• Up to 6 computers can share one wireless display or wireless USB hub*
• In-room wireless connectivity up to 30ft
• Ultra-Wide Band operates in the frequency of 3.1GHz to 4.8GHz (WiMedia™ Band Group 1)
• WiMedia 1.0 MAC <(>&<)> 1.1 PHY compliant
• Windows 8 compliant
*Requires the purchase of additional USB Host Adapters for the additional computers

Product Support

Downloads

Windows XP/Vista/7/8 Driver | Windows Firmware | Pairing Utility Quicklink
Mac OSX Driver | Mac Firmware

UWB Transmitter Firmware and Driver Update Instructions


PC:
Step 1 - Disconnect the USB transmitter from your computer and disconnect power from the Receiver unit.
Step 2 - Download and run the Windows Firmware Update. Reconnect the USB transmitter when prompted.
**Do NOT disconnect the USB transmitter while the Firmware Update is running.**
Step 3 - Follow the on-screen prompts to complete Firmware Update. Disconnect the USB transmitter after the Firmware is up to date.
Step 4 - Install the driver required for your Windows computer. Reconnect the USB transmitter and power on the receiver after the install is complete.

Mac:
Step 1 - Disconnect the USB transmitter from your computer and disconnect power from the Receiver unit.
Step 2 - Download and run the Mac Firmware update.
Step 3 – Open the dmg file and then click on the Trulink 2.0.
Step 4 – Plug in USB transmitter and you should see SCAH_2245 enabled.
Step 5 – Close the window and disconnect the USB transmitter.
Step 6 - Install the driver required for your Mac computer. Reconnect the USB transmitter and power on the receiver after the install is complete.

If you still have issues connecting your device contact a C2G Support Representative through Chat or by calling 0800-328-2916.